Additional Resources

 

 

What are your thoughts regarding What Would Cause My Electric Water Heater to Stop Working??

Many contemporary houses use an electrical hot water heater for their heating system, as a result of its convenience and simplicity of use. Nevertheless, similar to any other electric devices, troubles may arise with its usage, unexpectedly. It can be truly discouraging to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm adequate or perhaps also warm. Whatever the case may be, water heater problems can be quite nerve-racking. Fortunately, we've made a list of possible solutions to your water heater issues. There are a number of factors that could cause many of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety. Whatever the problem is, getting it fixed should not posture way too much of a problem if you comply with these steps:

 

Call A Professional:

If after replacing all faulty components and also resetting your temperature level, the water heater still isn't working, you may require to call a professional plumber for an expert opinion. The problem with your heating system could be that the cold and hot taps have been switched or it might be undersized for the quantity of hot water needed in your house. Whatever the case may be, a specialist plumber would certainly help solve the trouble.

 

Inspect Your Power Supply:

As fundamental as this may appear, it is extremely required. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, merely turn it on and off once again. Replace any kind of damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't warm enough, you might need to examine the temperature level settings on your top thermostat. Guarantee the breaker is switched off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This need to assist heat the water. Transform the circuit breaker back on as well as check if the trouble has been settled.

 

Inspect the Burner in the Water Heater:

If it's not a power trouble, then attempt having a look at your burner if it is still working. Examine each of your heating elements to ensure the problem isn't with any one of them. If any of them is malfunctioning, replace that part and afterwards inspect whether the warm water is back on.

 

Conclusion

Hot water heater troubles are not always significant. Many of them are because of small issues like a blown fuse or damaged burner. Replacing the damaged parts must suffice. However, if you are still not able to solve the issue, give a call to your nearby plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As an enthusiastic person who reads about How to Troubleshoot and Repair an Electric Water Heater, I thought sharing that short article was worth the trouble. Appreciated our write-up? Please share it. Let others find it. Thank you so much for taking the time to read it.

Get Estimate